Thursday 27 November 2014

Leopard dropship progress

I've been surface finishing the dropship this past few weeks, Progress has been sporadic (new baby and toddler who caught a well timed nasty cold for us to share).

However its looking sweet



After scrubbing the power residue off. I used some left over blue spray paint (wooden truck i made for my son)  to put a light coat over all the parts so i could see where i was sanding and make sure I didn't take off any details. I still have the nose to do (its in black because the blue paint ran out) and the underside of the stern then I'll need to use my needle files to get into the nooks sand paper couldn't.

Once that's done I'll give it a wash and then it give it a coat of dissolved putty primer and another fine sand. That should result in a good quality surface finish. Then surface seal it and on to thinking about mould making.

The internet was also down for a few days (its amazing what a pc cant do with out it). But it did enforce a real world job break and give me the chance to make up some instructions for the leopard. Mostly my mech don't need these as its clear what parts are an where they go, but the leopard does have an assembly order which needs to be followed your you'd have to pull glued bits apart and it can be hard to tell which way around some parts go.



 

I've also added a link on the right had side to my DA finished models gallery. Where you can see everything I have made and painted so far!

Saturday 1 November 2014

Dropship landed

Good news!

The Leopard dropship came yesterday. Its hard to say 100% that it came out great till I get all the media off it and it has a first coat of primer but at first inspection it looks real nice. It came missing 1 part and 1 part needed reprinting so those are getting done over the weekend.

I tempted fate to get some of these shots  loosely fitted the body together with no spine just so i could check out the scale (i laid on the turret and the bridge too).



As you can see the atlas stands up fine and I think he;s the biggest TT mech currently. He did have to till to get him in the door and access height will be a few MM lower when the bay doors are on but it was a price worth paying because otherwise the model would of been to expensive to print.


Above you can see the bay floor with the b'tech hex patten and below you can see the ships spine, thruster, and bay doors (inner and outter)

Ok so the badish news;
I had a cut on my leg 2 weeks ago I was trying to ignore it and help the wife by doing her chores/child care (she's pregnant and due 3 days ago, so were very much into over time) but that was a mistake, it became infected and I got seriously ill the last few days and I'm on a strong course of antibiotics. I should be fine but its very painful and I can't walk much, I have to bed rest to get it a chance to heal but that means no progress on any models as much as I'd like to get started.